6004RS 21.5x42x12mm Non-standard Deep Groove Ball Bearing
Item No :
6004RSSize (d*D*B) :
21.5x42x12mmLead Time :
3-5 daysWeight :
0.069KGShipping Port :
ChinaMOQ :
100 pcs6004RS 21.5x42x12mm Non-standard Deep Groove Ball Bearing
⚙️Structural features:
On both sides of 6004RS, there are steel frame-supported nitrile butadiene rubber contact-type sealings. These can effectively prevent dust, impurities, etc. from entering the bearing interior, and also reduce the leakage of lubricants, which helps to extend the service life and maintenance cycle of the bearing.
Cage material | Steel |
Branding | Famous Brand/RMO/Neutral/OEM |
Sealing | OPEN, ZZ , 2RS |
Material | Chrome Steel (Gcr15)or Stainless Steel |
Precision | ABEC-1 ABEC-3 ABEC-5 ABEC-7 |
Clearance | C0 C3 |
Vibration | Z1V1, Z2V2, Z3V3 |
Shipping Port | GUANGZHOU, NINGBO, SHANGHAI |
Payment | 100% TT, or 30% TT In Advance ,70% TT After Finished Product |
Service | Free Sample Can Be Provide |
It has a low friction coefficient, which can reduce energy loss and lower operating noise. Using steel cages enhances the durability and load-bearing capacity of the bearing, enabling it to withstand certain radial loads and relatively small axial loads. The single-row design makes it have a compact structure and is relatively lightweight.
This non-standard-sized deep groove ball bearing is used in equipment or situations where there are specific requirements for bearing dimensions, such as certain small mechanical devices, special instruments, etc., to meet their specific installation and operation needs.
1. Keep clean | 2. Use with caution | 3. appropriate tool | 4. Hot-loading | 5. Be careful of rust |
Dust will have a bad effect on the bearing, so keep the surrounding clean. | Strong impact during use can easily cause scratches and indentations. | Avoid replacing existing tools, and use appropriate tools. | Bearings are precision parts, so hot installation is recommended. | Sweat on your hands during operation will cause rust, so it is best to wear gloves. |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
6×12×4mm MR126ZZ bearings are made of chrome steel with high precision and low noise. We have large stock and can provide free samples for testing
DetailsR168ZZ bearing is made of chrome steel. Excellent performance and low noise level. We have it in stock and can provide free sample for testing.
DetailsIt's composed of an inner ring, an outer ring, steel balls and a cage.
DetailsSimilar to standard single-row deep groove ball bearings, it is composed of components such as inner ring, outer ring, steel balls and cage.
DetailsThis nylon cage is suitable for 51105 thrust ball bearings and is made of nylon PA66 material.
DetailsHi! Click one of our members below to chat on